Operational Amplifiers: Inverting vs Non-Inverting Op-Amps
An operational amplifier is a high-gain electronic voltage amplifier with differential input and single-ended output.
What is the Capacitor Symbol on a Multimeter
A capacitor is an important electrical component.
A Guide to Understand Capacitor Symbols
The capacitor symbol in a circuit diagram represents the physical capacitor element. It's typically drawn as two parallel lines or plates, indicating the two conductive plates in a physical capacitor.
Purge Valve: What It Is, How It Works, Symptoms
A purge valve, also known as a purge solenoid or a canister purge valve, is a crucial component of a vehicle's evaporative emission control (EVAP) system.
Signs of Bad Oil Pressure Sensor and How to Test It
An oil pressure sensor, also known as an oil pressure switch or sender, is a device that monitors the oil pressure in your vehicle's engine.
Mosfet Amplifier: Definition, Working and Uses
MOSFET amplifiers are a subclass of amplifiers that use MOSFET technology to process digital signals with less power.
Understanding the Crankshaft Position Sensor(Definition, Symptoms & Testing）
Automotive crankshaft position sensor is one of the most important sensors on the engine, its role is to detect the crankshaft Angle position and engine speed.
Exploring the Zener Diode| Definition, Uses & Fuctions
A Zener diode is a type of diode in which a P-type semiconductor and an N-type semiconductor fuse together to form a PN junction, around which a depletion layer with reverse-phase ions is formed.
Full Wave Rectifier: Definition,Theory,Types and Circuit
A full-wave rectifier is an electronic device that converts alternating current (AC) that periodically reverses direction into direct current (DC) that flows in only one direction.
Convert Picofarad (pF)
A picofarad (pF) is a unit of measurement for capacitance, commonly used to measure and calibrate the capacitance in electronic devices.
Full Bridge Rectifier: What It is & How It Works
The Full Bridge Rectifier, also known as the Full Wave Bridge Rectifier or Diode Bridge Rectifier, is an electronic device that converts Alternating Current (AC) into Direct Current (DC).
HOW TO TEST FOR A FAULTY DIODE IN A CIRCUIT
Diodes are the most commonly and widely used electrical components, whether in AC or DC circuits.
How to Choose the Right Microcontroller for Your IoT Project: ESP32 vs. Arduino vs. STM32
The Internet of Things (IoT) has disrupted the interaction between devices, the physical world, and the cloud. IoT applications can be found in smart homes and wearable devices, as well as industry automation and smart cities. The core of any IoT system is a microcontroller, which performs data processing, communication, interfaces with sensors, and manages power. A microcontroller is not a small thing to consider. It has a direct impact on the performance of your project, power efficiency, scalability, development time, and cost. Some of the successful alternative incorporators nowadays have included Arduino, ESP32, and STM32.
Introduction to Nexperia Automotive-Grade ICs
Electronics in the automotive industry require accuracy, durability and complete reliability. All systems, including the engine control and modern driver assist, are based on parts that have to endure both high temperature and electrical interference, as well as extended durability of operation.
ASIC vs FPGA Comparison: Performance, Cost, and Design Differences Explained
This article compares Application-Specific Integrated Circuits (ASICs) and Field-Programmable Gate Arrays (FPGAs), two technologies used for creating custom digital circuits.
The Rise of Automotive-Grade SiC/GaN Power Devices in Electric Vehicles
The automotive fast recovery Silicon Carbide (SiC) and Gallium Nitride (GaN) power devices emerge as game-changing technologies.
How to Safely Discharge an AC Capacitor
AC capacitor discharge refers to the process in which a capacitor releases its stored electrical energy in an alternating current (AC) circuit.
Signs of a Bad Camshaft Position Sensor and How to Test it?
A car has a variety of electrical components, one of which is called a camshaft position sensor (CMP). This section will discuss this component, the signs that indicate a problematic camshaft position sensor, and the procedures for doing so.
Symptoms of a Bad Speed Sensor and How to Test It?
Speed sensors are utilized to measure the speed at which devices are spinning. Many vehicles, including automobiles, aerospace vehicles, off-highway and construction equipment, railway vehicles, and military vehicles, require speed sensors.
Current Divider: definition, applications & formula
A current divider is an electrical circuit configuration used to split or divide an input current into multiple branches or paths.
74LS04 Hex Inverter Datasheet(PDF) and Pinout
This article will explain some detailed information about 74LS04 Hex Inverter, including its datasheet, pinout, features and specifications.
C1815 Transistor: Pinout, Features & Specifications
This article gives a comprehensive introduction to the key information of the C1815 transistor