Metal Oxide Varistor (MOV) Overview: Working and Application
The blue or orange-colored circular part that you can typically spot on the AC input side of any Power Supply Circuit is a Metal Oxide Varistor or MOV.
What is Universal Serial Bus (USB)?
Universal Serial Bus (USB) is a serial bus standard and a technical specification for input and output interfaces. It is widely used in information communication devices.
What is a Hard Disk Drive (HDD)?
Hard Disk Drive (HDD) is the main storage device of a computer. It consists of one or more aluminum or glass discs. These discs are covered with ferromagnetic material.
What is a Wireless Network Adapter?
The wireless network adapter is actually a terminal wireless network device, which needs to be used for Internet access through the wireless connection network under the wireless coverage of the wireless local area network.
Bluetooth Explained: Characteristics and Applications
Bluetooth is a global specification of wireless data and voice communication, which is a special close-range wireless technology for setting communication environments for fixed and mobile devices.
VRAM (Video RAM) Explained
VRAM (video RAM), also known as a frame buffer, is used to store the rendering data processed or about to be extracted by the graphics chip. Like computer memory, VRAM is a component used to store graphics information to be processed.
What is UWB (Ultra-wideband)?
UWB (Ultra-wideband) technology is a wireless carrier communication technology, which does not use a sinusoidal carrier, but uses the non-sinusoidal narrow pulse of the nanosecond level, so the spectrum range is wide.
How Fast is Wi-Fi 6?
Wi-Fi 6 ( IEEE 802.11.ax) is the sixth-generation wireless network technology and the name of the Wi-Fi standard. It is a wireless local area network technology created by the Wi-Fi Alliance based on the IEEE 802.11 standard. Wi-Fi 6 will allow communication with up to 8 devices with a maximum rate of 9.6Gbps.
The Difference between Carbon Film and Metal Film Resistors
Invented by Boykin in 1959, resistors are today commonly used in almost all electronic circuits. Resistors can be described as a device that resists the flow of current flowing through itself, back when the resistor size was very huge and the tolerance value reached as high as 10 percent when it was implemented.
The Gatekeeper of a Successful Design is the Interconnect
Systems-on-chips (SoCs) are increasingly becoming networks to which you attach separate blocks of intellectual property (IP).
Thermistor Introduction--?Temperature Sensitive Component
Thermistors are a type of sensitive component, which are divided into positive temperature coefficient thermistor (PTC) and negative temperature coefficient thermistor (NTC) according to the temperature coefficient.
The network-on-chip interconnect is the SoC
“The network is the computer,” coined by John Gage of Sun Microsystems back in 1984, proved incredibly insightful. This idea is re-emerging, this time within the SoC realm.
Introduction to Nexperia Automotive-Grade ICs
Electronics in the automotive industry require accuracy, durability and complete reliability. All systems, including the engine control and modern driver assist, are based on parts that have to endure both high temperature and electrical interference, as well as extended durability of operation.
ASIC vs FPGA Comparison: Performance, Cost, and Design Differences Explained
This article compares Application-Specific Integrated Circuits (ASICs) and Field-Programmable Gate Arrays (FPGAs), two technologies used for creating custom digital circuits.
The Rise of Automotive-Grade SiC/GaN Power Devices in Electric Vehicles
The automotive fast recovery Silicon Carbide (SiC) and Gallium Nitride (GaN) power devices emerge as game-changing technologies.
How to Safely Discharge an AC Capacitor
AC capacitor discharge refers to the process in which a capacitor releases its stored electrical energy in an alternating current (AC) circuit.
Signs of a Bad Camshaft Position Sensor and How to Test it?
A car has a variety of electrical components, one of which is called a camshaft position sensor (CMP). This section will discuss this component, the signs that indicate a problematic camshaft position sensor, and the procedures for doing so.
Symptoms of a Bad Speed Sensor and How to Test It?
Speed sensors are utilized to measure the speed at which devices are spinning. Many vehicles, including automobiles, aerospace vehicles, off-highway and construction equipment, railway vehicles, and military vehicles, require speed sensors.
Current Divider: definition, applications & formula
A current divider is an electrical circuit configuration used to split or divide an input current into multiple branches or paths.
74LS04 Hex Inverter Datasheet(PDF) and Pinout
This article will explain some detailed information about 74LS04 Hex Inverter, including its datasheet, pinout, features and specifications.
C1815 Transistor: Pinout, Features & Specifications
This article gives a comprehensive introduction to the key information of the C1815 transistor
Guide to IC 7408 Logic Gate Chip: Specifications, Applications, and Pinout
The 7408 IC, a crucial component in electronics, features?four logic gates, each with two inputs.