3M™ Spray wire pulling lubricant is a white clean, non-staining, high performance, thin liquid cable pulling lubricant that is easily applied by either spraying or wiping. The lubricant has excellent cling and wetting properties for all cable types. Case is 4 containers.

The thick, consistent lubricant does not liquefy or separate with hot aging; it scoops and applies easily to wire and cable without runs or drips in hot temperatures; and it will not evaporate too soon after pulls. The lubricants low friction coefficient lessens the chance of wire damage from high pulling forces, wipes off the cable quickly and cleanly and leaves less residue in the conduit to block future pulls or prevent removal. Because Wire Pulling Lubricant Wax can be immersed in water for 30 minutes with minimal weight loss, it is also the choice for wet weather applications.

The thick lubricant remains easy to scoop and apply to wire and cable without runs, or drips in both warm, and cold temperatures. The lubricant produces a low coefficient of friction that lessens the chance of wire damage from high pulling forces. It wipes off the cable quickly and cleanly before terminating, or splicing common wire and cable jackets.

3M™ Spray Wire Pulling Lubricant is a clean, non-staining, high-performance, thin liquid cable pulling lubricant.

It is designed to free stuck cable (and cable bundles) by softening the binding materials (wax, rust, soap, dirt, adhesive, residue, bitumen, etc.). It lubricates to ease cable removal, leaves empty conduit undamaged and ready for re-use after cleaning and drying and it lowers duct reclamation costs by eliminating expensive cut-ins once the cable has broken free. Loosener does not allow reuse of cable being removed as they may be ruined by the solvent nature of the product and the high pulling forces required for removal.

3M™ Clear Wire Pulling Lubricant is a clear, colorless, slow drying, easy to apply gel which is an excellent lubricant for everyday pulling of both electrical and communication cable. Case is 1 container.

It is designed to free stuck cable (and cable bundles) by softening the binding materials (wax, rust, soap, dirt, adhesive, residue, bitumen, etc.). It lubricates to ease cable removal, leaves empty conduit undamaged and ready for re-use after cleaning and drying and it lowers duct reclamation costs by eliminating expensive cut-ins once the cable has broken free. Loosener does not allow reuse of cable being removed as they may be ruined by the solvent nature of the product and the high pulling forces required for removal.

MMMFF-9200-1186-4

"""3M™ Silicone Lubricant, 24 fl oz Can (Net Wt 13.25 oz), 12/Case, NOT FORSALE IN CA AND OTHER STATES"""

Not only does 3M™ Wire Pulling Lubricant Gel make wire pulling jobs smoother and safer, it also wipes off the cable quickly and cleanly before terminating or splicing. The consistent gel does not liquefy, or separate with hot or cold aging. It stays thick, smooth and ready to apply. Temperature use range is 20(deg)F to 110(deg)F.

Not only does 3M™ Wire Pulling Lubricant Gel make wire pulling jobs smoother and safer, it also wipes off the cable quickly and cleanly before terminating or splicing. The consistent gel does not liquefy, or separate with hot or cold aging. It stays thick, smooth and ready to apply. Temperature use range is 20(deg)F to 110(deg)F.

3M™ Clear Wire Pulling Lubricant is a clear, colorless, slow drying, easy to apply gel which is an excellent lubricant for everyday pulling of both electrical and communication cable and where cleanliness is a concern. Case is 4 containers.

The thick lubricant remains easy to scoop and apply to wire and cable without runs, or drips in both warm, and cold temperatures. The lubricant produces a low coefficient of friction that lessens the chance of wire damage from high pulling forces. It wipes off the cable quickly and cleanly before terminating, or splicing common wire and cable jackets.

The thick, consistent lubricant does not liquefy or separate with hot aging; it scoops and applies easily to wire and cable without runs or drips in hot temperatures; and it will not evaporate too soon after pulls. The lubricant`s low friction coefficient lessens the chance of wire damage from high pulling forces, wipes off the cable quickly and cleanly and leaves less residue in the conduit to block future pulls or prevent removal. Because Wire Pulling Lubricant Wax can be immersed in water for 30 minutes with minimal weight loss, it is also the choice for wet weather applications.

Not only does 3M™ Wire Pulling Lubricant Gel make wire pulling jobs smoother and safer, it also wipes off the cable quickly and cleanly before terminating or splicing. The consistent gel does not liquefy, or separate with hot or cold aging. It stays thick, smooth and ready to apply. Temperature use range is 20(deg)F to 110(deg)F.

3M™ Spray wire pulling lubricant is a white clean, non-staining, high performance, thin liquid cable pulling lubricant that is easily applied by either spraying or wiping. The lubricant has excellent cling and wetting properties for all cable types. Case is 12 containers.

The thick, consistent lubricant does not liquefy or separate with hot aging; it scoops and applies easily to wire and cable without runs or drips in hot temperatures; and it will not evaporate too soon after pulls. The lubricant`s low friction coefficient lessens the chance of wire damage from high pulling forces, wipes off the cable quickly and cleanly and leaves less residue in the conduit to block future pulls or prevent removal. Because Wire Pulling Lubricant Wax can be immersed in water for 30 minutes with minimal weight loss, it is also the choice for wet weather applications.

3M™ Clear Wire Pulling Lubricant is a clear, colorless, slow drying, easy to apply gel which is an excellent lubricant for everyday pulling of both electrical and communication cable and where cleanliness is a concern. Case is 12 containers.

SILICONE LUBRICANT (DRY TYPE)

SILICONE LUBRICANT PLUS