3M™ Cold Shrink Tubes are designed using a unique Cold Shrink delivery system. Products are supplied prestretched on a removable core for efficiency and ease of installation. Removal of the core (unwind) after positioning allows the product to shrink into position forming a moisture-tight seal. The live memory action of the specially formulated material ensures a permanent, durable environmental seal and insulation.

These kits are designed to be used with copper compression, one- or two-hole lugs. After being crimped onto the cables, the lugs are bolted together in an inline configuration, then insulated and sealed with the 3M™ Motor Lead Splicing Kit. Each kit contains all the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlok 30000 Series copper compression lugs, or other UL listed copper lugs, can be used.

3M™ Cold Shrink Tubes are designed using a unique Cold Shrink delivery system. Products are supplied prestretched on a removable core for efficiency and ease of installation. Removal of the core (unwind) after positioning allows the product to shrink into position forming a moisture-tight seal. The live memory action of the specially formulated material ensures a permanent, durable environmental seal and insulation.

These kits are designed to be used with copper compression, one- or two-hole lugs. After being crimped onto the cables, the lugs are bolted together in an inline configuration, then insulated and sealed with the 3M™ Motor Lead Splicing Kit. Each kit contains all the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlok 30000 Series copper compression lugs, or other UL listed copper lugs, can be used.

3M™ Motor Lead Splicing Kits 5300 Series are a series of kits designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtails (stub) connections at 1000 Volts and less. The splices main component, the lug cover, is made from EPDM rubber as a slip-on. A mastic is used for the moisture seal. These kits are designed to be used with copper compression, one-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, the insulated and sealed with the 3M™ Motor Lead Splicing Kit. Each kit makes three splices and contain all the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. Scotchlok 30,000 Series copper compression lugs, or other UL listed copper lugs, can be used.

These kits are designed to be used with copper compression, one- or two-hole lugs. After being crimped onto the cables, the lugs are bolted together in an inline configuration, then insulated and sealed with the 3M™ Motor Lead Splicing Kit. Each kit contains all the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlok 30000 Series copper compression lugs, or other UL listed copper lugs, can be used.

These splice kits are used for single conductor, non-shielded 5/8 kV cables.

3M™ Cold Shrink Tubes are designed using a unique Cold Shrink delivery system. Products are supplied prestretched on a removable core for efficiency and ease of installation. Removal of the core (unwind) after positioning allows the product to shrink i

3M™ Cold Shrink Tubes are designed using a unique Cold Shrink delivery system. Products are supplied prestretched on a removable core for efficiency and ease of installation. Removal of the core (unwind) after positioning allows the product to shrink into position forming a moisture-tight seal. The live memory action of the specially formulated material ensures a permanent, durable environmental seal and insulation.

3M Motor Lead Splicing Kits 5300 Series are a series of kits designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtails (stub) connections at 1000 Volts and less. The splices main component, the lug cover, is made from EPDM rubber as a slip-on. A mastic is used for the moisture seal. These kits are designed to be used with copper compression, one-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, the insulated and sealed with the 3M Motor Lead Splicing Kit. Each kit makes three splices and contain all the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. Scotchlok 30,000 Series copper compression lugs, or other UL listed copper lugs, can be used.

3M™ Motor Lead Splicing Kits 5300 Series are a series of kits designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtails (stub) connections at 1000 Volts and less. The splices main component, the lug cover, is made from EPDM rubber as a slip-on. A mastic is used for the moisture seal. These kits are designed to be used with copper compression, one-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, the insulated and sealed with the 3M™ Motor Lead Splicing Kit. Each kit makes three splices and contain all the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. Scotchlok 30,000 Series copper compression lugs, or other UL listed copper lugs, can be used.

These kits are designed to be used with copper compression lugs. After being crimped onto the cables, the lugs are bolted together, then insulated and sealed with the 3M™ Motor Lead Splicing Kits. Each kit contains all the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlock Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be used.

3M™ Cold Shrink Tubes are designed using a unique Cold Shrink delivery system. Products are supplied prestretched on a removable core for efficiency and ease of installation. Removal of the core (unwind) after positioning allows the product to shrink i

3M™ Splice Kits 8420 Series are designed using the unique cold shrink delivery system developed by 3M™. Products are supplied pre-stretched on a removable core for efficiency and ease of installation.

PS-3# 3M(TM) Cold Shrink Insertion Seal PS-3_ 10 per case

3M™ Cold Shrink Tubes are designed using a unique Cold Shrink delivery system. Products are supplied prestretched on a removable core for efficiency and ease of installation. Removal of the core (unwind) after positioning allows the product to shrink into position forming a moisture-tight seal. The live memory action of the specially formulated material ensures a permanent, durable environmental seal and insulation.

3M™ Motor Lead Splicing Kits 5300 Series are a series of kits designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtails (stub) connections at 1000 Volts and less. The splices main component, the lug cover, is made from EPDM rubber as a slip-on. A mastic is used for the moisture seal. These kits are designed to be used with copper compression, one-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, the insulated and sealed with the 3M™ Motor Lead Splicing Kit. Each kit makes three splices and contain all the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. Scotchlok 30,000 Series copper compression lugs, or other UL listed copper lugs, can be used.

3M SCOTCHCAST MINING SPLICE 8096

3M COLD SHRINK INSULATOR 8448-82

Cable Accessories Cold Shrink Kit Silicone Rubber Black